Home › Asphalt Milling and Reclamation
Prepare your next resurfacing project with asphalt milling in Denton, TX. We profile and remove existing pavement or perform full depth reclamation to create a stable base for new asphalt.
Precision Asphalt Denton provides professional asphalt milling throughout Denton, TX, Texas and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (940) 398-8536 or request your free quote.
Local Asphalt Milling Experts in Denton, TX
If your parking lot or driveway in Denton is cracked, uneven, or holding water, it does not always need a full tear-out. Asphalt milling lets Precision Asphalt Denton remove just the damaged surface, re-profile the pavement, and prepare it for a new, smooth layer. It is one of the most effective ways to fix serious surface problems while saving both time and money compared to full reconstruction.
In asphalt milling, we use a specialized machine with a rotating drum and hundreds of cutting teeth to grind off a precise depth of existing asphalt. The material we mill off is collected by a conveyor and loaded directly into trucks so your property stays cleaner and safer during the process. We typically remove between 1 and 3 inches, depending on the condition of the pavement and what is needed to match surrounding grades and drainage.
Denton’s hot summers and occasional winter freezes are hard on asphalt, which is why so many local commercial lots, HOAs, and long driveways are good candidates for milling. Instead of endlessly crack sealing and patching, milling lets us strip off the failed surface and give you a new wearing layer on top of a stronger base. Precision Asphalt Denton evaluates your site in person, checks for base failures, and then recommends either straightforward milling and overlay or full-depth reclamation if the base is too far gone.
How Asphalt Milling Works Step by Step
Precision Asphalt Denton follows a clear, organized process so you know exactly what will happen on your property.
First, we inspect and mark the area. We look for soft spots, severe alligator cracking, rutting, and drainage issues that may require deeper repair. We then mark transitions at sidewalks, entrances, ADA ramps, and drainage grates so the milled surface will tie in smoothly and not create trip hazards or steep lips.
Second, we schedule utility locates where needed and set a production plan. For busy sites in Denton, like retail centers along University Drive or office parks, we often phase the work so businesses can stay open. We coordinate start times, access routes, and staging areas for trucks to keep traffic flowing.
Third, we bring in the milling machine. The operator sets the cutting depth based on your pavement design and our measurements. As the machine moves forward, carbide teeth grind the asphalt into small, reusable pieces. A conveyor loads this milled asphalt into dump trucks following alongside. We maintain a consistent speed and depth to avoid waves or bumps in the milled surface.
Fourth, we fine-tune the grade. After the main pass, we use skid steers or smaller milling heads to clean up edges, in front of garage doors, around manholes, and near curbs. We check slopes with a level or laser to confirm water will run to the proper drains instead of pooling.
Finally, we broom and clean the surface so it is ready for tack coat and new asphalt. If we are doing full-depth reclamation instead of simple milling, we then use a reclaimer to mix the pulverized asphalt with base material and sometimes cement or other stabilizers, compact it, and create a new solid foundation before paving.
Asphalt Reclamation to Fix Failing Bases
When the base under your asphalt is failing, milling alone will not solve the problem. This is where full-depth reclamation comes in. Precision Asphalt Denton uses reclamation on rural driveways, older industrial lots, and roads around Denton where the pavement has deep cracks, potholes that return quickly, or visible movement under heavy vehicles.
In reclamation, we use a powerful reclaimer to grind the existing asphalt and some of the base below it into a blended layer. Instead of hauling all that material away, we reuse it in place. We can improve this new base by adding cement, lime, or other stabilizing agents, then mix again until the material is uniform.
Once mixed, we shape the reclaimed layer with motor graders to achieve the right crown or slope. Proper shaping is essential in Denton because heavy summer storms can drop a lot of water in a short time. Then we compact the layer with rollers until it reaches the required density, creating a base that performs like a brand new foundation but at a lower cost than full removal and replacement.
After the reclaimed base cures (time depends on the stabilizer used and the weather), we come back and place new hot mix asphalt. For high-traffic commercial lots, we may recommend a thicker asphalt section or a stronger mix design. For residential or light commercial, a more standard design can be appropriate. The result is a pavement that looks and functions like new, built on a base designed to last.
Costs, Local Timing, and What Affects Your Price
Homeowners and property managers in Denton often ask what drives the cost of asphalt milling and reclamation. Precision Asphalt Denton is straightforward about the main factors so you can budget accurately.
The biggest cost drivers are project size, required depth, and whether the base needs reclamation or can be reused as is. A simple 1 inch milling and overlay on a sound base is at the lower end of cost per square foot. A full-depth reclamation with stabilization and a thicker asphalt section costs more upfront but can be the most economical option over the life of the pavement.
Access also matters. Wide open parking lots are quick and efficient to mill. Tight residential driveways, steep grades, and limited truck access around Denton neighborhoods can slow production. That means more labor time and sometimes smaller equipment, which can increase the per square foot cost slightly.
Timing your project around Denton weather helps both quality and price. The best season for milling and reclamation is typically late spring through early fall when daytime temperatures reliably stay above 60 degrees and rain is less frequent. In cooler months we can still mill, but paving on top may need to be scheduled for a warmer window so the new asphalt compacts and bonds properly. Planning ahead lets us group material deliveries and crews efficiently, which can help control costs.
We also consider traffic control needs. If your site is along busy roads in Denton or has heavy customer traffic, we may need cones, flaggers, or off-hours work. These logistics add some cost but are important for safety and to keep your business functioning during the project.
Choosing Precision Asphalt Denton and What to Expect
Before you hire an asphalt milling contractor in Denton, there are a few key things to check. Make sure the company owns or has reliable access to modern milling and reclamation equipment, understands local soil and weather conditions, and will give you a clear plan that covers drainage, transitions, and traffic control. Precision Asphalt Denton is local, so we know how Denton clay soils behave, where drainage tends to fail, and how summer heat affects scheduling and compaction.
When you work with us, we start with a site visit, not just an online map. We walk the pavement, probe soft spots, and talk about how you use the surface: heavy trucks, RV parking, high-turnover retail traffic, or mostly residential vehicles. This helps us choose the right milling depth, whether reclamation is needed, and what asphalt mix and thickness will hold up best for you.
Communication is a big part of our process. Before work starts, you receive a written outline of phases, including any utility coordination, milling schedule, cleanup, and paving. For commercial sites and HOAs in Denton, we can provide notices you can send to tenants or residents, with clear instructions about parking and access while work is underway.
After milling and reclamation, we do a walkthrough with you to review grades, transitions, and any punch list items. We also explain basic care of the new asphalt surface, like how long to keep heavy loads off fresh pavement and why you should keep drainage inlets clear during storms. Our goal at Precision Asphalt Denton is a surface that not only looks good on day one but holds up through Denton’s heat, storms, and day-to-day traffic for many years.
